Skip to main content

IR Loader

An impulse response (IR) is a short audio file that records how a speaker cabinet and microphone, or a physical space, shape a sound. When you load an IR, XR1 applies the same character to your signal.

  • Cabinet IRs reproduce a speaker cabinet and the microphone in front of it.
  • Space IRs reproduce the way sound travels and reflects in a room. A room with concrete walls sounds very different from one with wooden walls, and a 10 m² room sounds very different from a 100 m² one.

You can use the IRs built into XR1, or import your own and third-party IR files (.wav).

Load an IR File​

IR Loader block icon
  1. Add an IR Loader to the Signal Chain. Single and dual versions are available for cabinet IRs and for reverb (space) IRs.
  2. Tap the IR Loader to open its parameters, then browse and select an IR file.
IR Loader parameters

Parameters​

  • Bypass: turns this IR on or off.
  • IR File: selects the IR file.
  • Phase Flip: reverses the polarity of the IR.
  • LPF: sets the cutoff frequency of the low-pass filter.
  • HPF: sets the cutoff frequency of the high-pass filter.
  • Delay: sets the time before the IR starts.
  • Pan: sets the left/right balance.