Skip to main content

Troubleshooting

Clipping​

If a level meter turns red, or the sound suddenly becomes harsh, check the levels in this order:

  1. In Global I/O, check whether the input you are using is too high, and lower its gain.
  2. Check the input level of the Signal Chain.
  3. Check the output level of each effect in the Signal Chain, one at a time.
  4. Lower Master Volume.

High CPU Usage​

You can check CPU usage in Settings > CPU Monitor.

  • If one path uses too much CPU, XR1 stops you from adding more CPU-heavy effects to that path.
  • If you hear glitches or pops, remove effects from that path.

Noise or Hum​

  1. Turn on the noise gate at the Signal Chain input.
  2. Try the GND LIFT switch, or Ground Lift in the output settings.
  3. Keep XR1 away from high-power equipment, wireless devices, and USB devices, which can cause electromagnetic interference.
  4. Use the balanced outputs with balanced cables.
  5. Power all connected equipment (XR1, audio interface, speakers) from the same outlet or power strip, and do not share it with other electronic devices.

Factory Reset​

A factory reset restores XR1 to its factory defaults. Back up your data first.

  1. Sign in to your account.
  2. Back up your data to the cloud.
  3. In Settings > Reset, tap Factory Reset.
  4. Reconnect to the network, sign in, and restore your data.